ISOBLOK hardware and cable harness

ISOBLOK makes (even old) tractors compatible with widely used ISOBUS implements. The system consists of a cross-platform app and the ISOBLOK unit. The hardware requires a fixed installation on the tractor, but the display can be moved freely between tractors (in case of multi-tractor farms equipped with several ISOBLOKs).

The system is a cost-effective solution for every farm even to install one system per tractor.

Functions in detail:

1. The system is capable of performing the UT functions defined in the ISOBUS standard.

2. Displaying the IOP file of an ISOBUS implement connected to the tractor.

3. On the DataMask loaded from the IOP file, various machine controls and settings can be made manually.

4. The software handles multiple ISOBUS devices that can be connected to the network at the same time, so switching between WorkingSets is handled by the application.

5. USB interface between phone or tablet and the ISOBLOK (hardware), free serial (UART) interface for system integration with other devices (e.g. third-party navigation, automatic steering system, etc.).

6. Use of built-in and external GPS speed signal for speed-dependent application rate control.

The system has two main components:

1. ISOBLOK App - a cross-platform software

2. ISOBLOK hardware and its cable-harness

The cable-harness fulfills all ISOBUS-hardware requirements, therefore it has an Incab interface, connection to the ignition switch and the necessary fuses and relays for the power line. Therefore the power supply to the ISOBUS is safely disconnected, when the ignition of the tractor is switched off. The connection between the display and the hardware is maintained by USB.

The lead time of the product is 3-4 weeks.